KEYSIGHT N9912A FieldFox RF Analyzer

$ 92.90

GTIN: 8719076049265 MPN: PMP242307010 Categories: , , , Brand:
Keysight N9912A The standard model includes a cable and antenna analyzer (CAT) 4 GHz standard (upgradeable to 6 GHz via option) Expand capabilities with optional T/R vector network analyzer, spectrum analyzer, built-in power meter, and more Many optional functions are available – please see below for more information. FieldFox Handheld Combination RF Analyzer (4 GHz, Upgradeable to 6 GHz) The Keysight N9912A is a handheld combination RF analyzer. The standard model includes 4 GHz bandwidth and the following functionalities: One port cable and antenna analyzer Broadband calibration CalReady Standard mechanical cal kit support Measurements include: return loss, distance-to-fault (DTF), one port cable loss, and VSWR Information on N9912A options Please note that bandwidth is upgradeable to 6 GHz. There are also a variety of other optional testing functions, including vector network analysis, spectrum analysis, and For information on the other models in the FieldFox series, please see the selection information below on this page. Cable and antenna analysis Fifty to sixty percent of cell site problems are caused by faulty cables, connectors, and antennas. Degraded feed lines cause poor coverage, unnecessary handovers, paging failures, and access failures on the uplink. To avoid service quality problems, keeping cell sites’ cable and antenna systems in good condition is critical. Use FieldFox to measure return loss, VSWR, insertion loss/transmission, one-port cable loss, and distance-to-fault (DTF). You can test antennas, cables, filters, and amplifiers with a single instrument. Return loss and DTF measurements FieldFox can make both return loss and distance-to-fault measurements at the same time. This helps you correlate overall system degradation with specific faults in the cable and antenna system. The built-in cable editor allows you to edit existing cable types on-site and save them as new cable types with user-defined names. CalReady-calibrated at power on and ready to go Each instrument is CalReady at the RF Out port, following power-on or preset. This means it’s already calibrated and ready to make measurements such as one-port cable loss, VSWR, return loss, and DTF measurements at the test port.

Shipping

Shipping is calculated at checkout based on the contents of your cart and the shipping address. This takes into account product weight and dimensions, and whether the location being sent to is metro, regional or remote. The price will change depending on whether it is a commercial or residential address. There is an extra charge for items marked as *Dangerous Goods by the courier.

Please note, that we are currently using Freight Exchange as a freight broker. Their terms & conditions are listed here.

We ship to most destinations in Australia. If the checkout does not allow your shipping address, please contact us and we will see what we can do to help.

We use different couriers depending on rates and services available, including Border Express, Couriers Please and Australia Post. If you have a specific reason to use or not use a particular courier please let us know.

We will generally insure any delivery above $500, BUT;

Freight damages MUST be reported to us within 24 hours of delivery for insurance claims on damages to be realised. Where possible please inspect the delivery for external damage to the packaging, and if damage is suspected inspect the goods BEFORE signing for the delivery.

Please refuse any obviously damaged deliveries (smashed panels, dented batteries) and ask the delivery driver to return the delivery to the depot and report the damages to us ASAP.

If you have granted “Authority to leave” or missed the driver, or have your delivery made to a depot, have the receiver inspect the delivery and please report any freight damage to us directly with photos via email within 24 hours of the delivery being made.

Unfortunately, we cannot guarantee damages will be covered by insurance if they are reported after 24 hours from the time of delivery.

It varies greatly based on the destination and the products ordered. Orders are usually dispatched from our warehouse in Preston, VIC within 48 hours. You can use the estimates below as a rough guide for shipping time:

  • VIC and SA: 1-2 days
  • QLD and NSW: 2-3 days
  • NT, WA and TAS: 3-10 days +

These estimates do not apply if the destination is regional or remote. Once orders leave our warehouse we have very little control over the actual shipping time. If you need a more accurate estimate of shipping time please contact us.

RETURNS

Thanks for shopping at Preston Off Grid. If you are not entirely satisfied with your purchase, we’re here to help.

You have 30 calendar days to return an item from the date you received it.

To be eligible for a return:

  • Your item must be unused and in the same condition that you received it.
  • Your item must be in the original packaging.
  • Your item needs to have a receipt or proof of purchase.
  • Change of Mind returns may incur a restocking fee.

Once we receive your item:

  1. We will inspect it and notify you that we have received your returned item.
  2. We will immediately notify you on the status of your refund after inspecting the item.
  3. If your return is approved, we will initiate a refund to your credit card (or original method of payment).
  4. You will receive the credit within a certain amount of days, depending on your card issuer’s policies.

You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non­refundable.

If you receive a refund, the cost of return shipping will be deducted from your refund.

ALL requests for warranty or service MUST be lodged via our DIAMOND DISK 3/4″ We will NOT accept any goods without an RMA being allocated to you first.

Goods that are covered by a Manufacturer’s Warranty will be eligible for a replacement or repair, at the discretion of the manufacturer.

DOA (Dead on Arrival) warranty claims must be lodged within 7 days of receiving goods. It is the customer’s responsibility to inspect all goods within this time period.

We do not provide replacements to cover you while your item is tested or repaired under warranty. It is the customer’s responsibility to ensure they have sufficient backup equipment to cover them in the event of equipment failure. We highly recommend people who are living off-grid, or using our equipment for mission-critical applications, invest in backup Inverters and Solar Charge Controllers.

Freight damage claims must be lodged within 7 days of receiving goods. It is the customer’s responsibility to inspect all goods within this time period. We will not accept any claims outside of this time period.

Enquiry Cart ×
Loading....